A two-way zipper changes how a hoodie is worn and how its front must be constructed. The opening can be adjusted from the top or bottom, so zipper selection belongs early in product development.
VIENA FACTORY develops samples and manufactures garments for this product direction through our specialised production units in Vietnam.
Start with the garment and fabric
Specify brushed fleece or French terry and discuss the 360–420 GSM direction appropriate to the fit. Confirm zipper tape, slider type and the intended garment length together. Hardware availability can determine which dimensions are practical for a small run.
Brushed fleece, French terry and rib
Nỉ bông is the brushed-fleece direction, while nỉ chân cua refers to a loop-backed French terry direction. Discuss 360–420 GSM as a development target where suitable and review the inside surface physically. Specify rib cuffs, necks and waistbands separately. Confirm composition, shade and wash behaviour on the sourced material rather than inferring them from a concept image.

Build a reasonable price around a clear brief
Ask for the zipper, hood lining and pocket construction to be stated in the quotation. A standard available zipper may be worth comparing with a fully custom option. Reasonable pricing comes from evaluating those choices against the brand’s priorities.
Develop 1–2 pieces per style before bulk
Operate both sliders repeatedly and check the front when closed, partly open and sitting down. Inspect waviness beside the zipper and the alignment of pocket edges. Keep the approved hardware reference with the sample so later sourcing does not silently change it.
Approve a two-way zipper on the actual fleece assembly
A double-zip hoodie needs a clear specification for opening direction and slider operation. Check the starting engagement, both sliders, hem finishing and facing clearance on the garment. The bulk at the lower end can feel different from a single-slider zip, especially with a heavy rib hem. A component that works loose on a table still needs validation after attachment and care. Record the accepted zipper identity so a similar-looking substitute is not introduced later.
| Decision | What to review | What to agree |
|---|---|---|
| Engagement | Test normal fastening from the lower end. | Check ease without forcing the sliders. |
| Hem assembly | Inspect zip end, facing and rib intersections. | Review contact and appearance while seated. |
| Front balance | Compare closed fronts before and after care. | Resolve waviness or material mismatch before artwork approval. |
Does a two-way zip automatically make the hoodie more durable?
No. It changes function. Durability depends on the component, attachment, care and use; approve the relevant performance separately.
Continue your product development
For the next decision, read Zip Hoodie Development: Front Balance and Hardware, compare Half-Zip Sample Approval: Hardware, Seams and Care, and use Rib Trims for 360–420 GSM Sweatshirt Fabrics to complete the brief.
Send a brief that can be quoted
- Product reference, front/back artwork and a measurement guide.
- Preferred fabric construction, composition, weight and finish.
- Sample quantity, planned bulk quantity and size/colour split.
- Brand labels, packaging requirements and shipping destination.
Request a project quotation or email tomvo@vienafactory.com. Explore VIENA Streetwear concepts and fabric development options while preparing your first brief.



