A full-zip hoodie changes character when it is worn open or closed. In a 360–420 GSM fleece or French terry brief, make the zip, front panels and pocket alignment explicit so the sample can be judged in both states.
Specify the zip as a component
Describe the opening length, puller appearance and intended colour. Ask the partner to propose suitable hardware and tape, then approve a physical reference. Confirm whether the proposed zip is available for the expected quantity rather than selecting solely from an inspiration photo.

Check the closed front
Wear the hoodie fully closed and inspect the hem, neckline and front alignment. Look for unexpected waviness or uneven pocket levels. Photograph the issue and discuss the fabric, pattern and attachment with the partner; a zip problem should not be diagnosed from one flat photo alone.
Review open styling
Open the zip and see how the panels fall over a cotton tee. Check the inside finish where it becomes visible. If artwork crosses the opening, approve its relationship to the zip carefully and agree what alignment variation is acceptable in production.
Your development checklist
- Approved zip reference and length
- Front balance checked zipped closed
- Inside finish reviewed while open
- Split artwork alignment requirements recorded
Should a graphic crossing the zip be approved digitally only?
No. Review a physical sample with the selected hardware and garment construction.
Keep a zip hoodie front balanced through care
The zipper tape and knitted body do not necessarily move alike during sewing or washing. Approve the zipper type, length, slider direction and the way the front is stabilised as part of the garment. Check the closed hoodie laid flat and on the wearer. A distorted front may be a feeding, tension or material compatibility issue; changing the zip length without diagnosis can create a different problem. Inspect again after care and confirm that the slider does not catch the facing or pocket bag.
| Decision | What to review | What to agree |
|---|---|---|
| Front alignment | Compare hem, pocket and panel levels across the closed zip. | Record any mismatch before making artwork placement decisions. |
| Operation | Open and close normally, including near the hem. | Review facing clearance and zip-end finishing. |
| After washing | Check waviness and tape/body relationships. | Use care instructions compatible with the selected component. |
Is any metal zipper suitable for a garment-washed hoodie?
Do not assume so. Confirm the chosen zipper’s compatibility with the planned process and test the full assembly; component finish and garment treatment matter.
Continue your product development
For the next decision, read Half-Zip Sample Approval: Hardware, Seams and Care, compare French Terry Zip Jackets: Collar and Hem Choices, and use French Terry Wash Samples: What to Record to complete the brief.
Discuss the next sample with VIENA FACTORY
Share your product references, target measurements, material preferences and quantity breakdown. VIENA FACTORY develops samples and manufactures clothing in Vietnam through specialised production units, with our team managing the agreed production stages. Send your project brief, or explore our streetwear references and collection development guide.
Reference images illustrate design directions and do not identify products manufactured by VIENA or imply a partnership with the pictured brand. GSM figures in this article are development targets; composition, availability and final specifications require project confirmation.




